1 litre of Agip SAE 10W fork oil. Eni Fork Oil 10W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use. The product is part of the Fork Oil series, which includes products with a different viscosity gradient to be selected in relation to the manufacturer's requirements and/or the damping action desired. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.

As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 5W also available, use a combination of 5W and 10W to tune your damping more precisely

Eni Fork Oil 10W is equipped with appropriate rheological features such as low temperature fluidity, high viscosity index and a very low sliding point, which results in smooth and uniform suspension behavior in a wide range of temperatures.

This product is characterized by high anti-wear properties, which ensure high protection and long service life to the lubricating parts.

The corrosion-resistant properties of Eni Fork Oil 10W allow effective protection of surfaces against corrosive phenomena.

Eni Fork Oil 10W has the necessary properties for the correct operation of the lubricated equipment, such as low foaming, low air retention, stability in hot conditions, and compatibility with rubber materials (gaskets).
Please note this part CANNOT be posted outside of the UK mainland area. ENI oils were previously sold under the AGIP name

 More than 5 in stock

GU30530527

1 litre of Agip SAE 15W fork oil, lighter weight than standard on most Guzzi models. Eni Fork Oil 15W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.

As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 10W also available, use a combination of 10W and 15W to tune your damping more precisely

Please note this part CANNOT be posted outside of the UK mainland area. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades. ENI oils were previously sold under the AGIP name

 More than 5 in stock

Quality Ariete fork Seal for V11 models with 43mm Marzocchi forks

Also known as Guzi ref. AP8163133

 More than 5 in stock

 01526195 GU01526195 01 52 61 95
 0152 6195 0152.6195 01.52.61.95

Also fits Aprilia Mana, Aprilia RST Futura (2001-2003), Aprilia 750 GT Shiver (2009), Aprilia Falco 1000 (2000-2003)

Fork seal for Marzocchi fork

Two fork types are used on recent small twins, we recommend checking your old fork seal before opening. These seals are for the Marzocchi fork. Also known as Guzzi ref. 599501 and 01530569

 More than 5 in stock

 27530584 GU27530584 27 53 05 84
 2753 0584 2753.0584 27.53.05.84

Also fits Aprilia RS125 (2006-2010), Aprilia, RX-SX 125 (2008-2010), Gilera Nexus 500 E3 (2006-2008), Piaggio, X9 500 Evolution (2006-2007)

Fork seal for Marzocchi M1R forks

 More than 5 in stock

30530502-z 30530502 GU30530502 30 53 05 02
 3053 0502 3053.0502 30.53.05.02

Also fits Laverda SFC1000

Dust cover for fork seals.

Only suitable for later V11 models with 43mm Marzocchi forks. See SUA01571 for 40mm version.

 4 in stock

Also fits Aprilia Mana 850, Benelli TNT 1130, Benelli Tornado 900, Cagiva Raptor 650, Ducati 1098, Ducati 1198, Ducati 848 08-10, Ducati 848 EVO, Ducati GT 1000 07-, Ducati Hypermotard 796, Ducati Monster 620, Ducati Monster 695, Ducati Monster 750 ie, Ducati Monster S2R 800, Ducati Multistrada 620, Ducati Sport 1000 06-, Ducati Streetfighter 1098

Dust cover for steering head bearing

2 required on Cali EV and other models

 1 in stock

 14517000 GU14517000 14 51 70 00
 1451 7000 1451.7000 14.51.70.00

Large washer used under stem nut

 2 in stock

 30516500 GU30516500 30 51 65 00
 3051 6500 3051.6500 30.51.65.00

Washer for crankshaft timing sprocket

Also used on steering stem on some models (e.g. T3)

 1 in stock

 95100837 GU95100837 95 10 08 37
 9510 0837 9510.0837 95.10.08.37

Stainless steel M10 dome head nut, used for fork slider pinch bolt and other applications

 More than 5 in stock

 92602210 GU92602210 92 60 22 10
 9260 2210 9260.2210 92.60.22.10